News
| June 22, 2010 | Just a quick note: I will be out of the country from June 22nd until July 23rd, 2010. During this time I will not be able to take on any additional work, nor be able to ship out any orders. When I return I will ship out any orders placed while I'm on the other side of the planet. | |||
|
|
||||
| March 4, 2008 | Holy Moley! A news update? For the four or so people that actually check this page, I'm changing a few pages to be better reflect what I'm doing now-a-days. Maybe a new layout will come, but probably not. Less fluff, more content. | |||
|
|
||||
| February 07, 2006 |
Wow, its been a long time since
updating the news. Have been busy with projects and schooling, so haven't
had much time to update the site. Hopefully that will change in the next
few days. Added a lathe to the shop as well as a remodel with a dedicated work bench. Hopefully we'll be cranking out more parts both turned and milled in the near future. Stay tuned! |
|||
|
|
||||
| August 15, 2005 | Been experimenting around with Break Beam Eyes in E-blade 1 and E-blade 2 frames. We currently have 2 test markers in, one with an E1 frame and one with an E2 frame, that we plan on configuring BBE's into. As more information becomes available, it will be posted. For now, please visit this thread for more information. | |||
|
|
||||
| July 22, 2005 |
Making the big switch over
to the 3rd generation of the site. Hope you all enjoy it! There will be lots of changes being made to the site in the next week or so. Bear with me as I try my best to perfect the site. |
|||
|
|
||||
| July 21, 2005 | Getting more stuff loaded into the site. Hopefully it will be up in a few days. | |||
|
|
||||
| July 15, 2005 | Working on the new site. Starting to get multiple pages up and running. More progress will be made throughout the week. More to come! | |||
|
|
||||
All content of this page is property of Warped Airsmithing.
If you have any comments or
questions, please contact agrueni@charter.net